|

Build Your Online Product Catalogs?
Product Name: |
ALK GM Tech2 Scanner Tech 2 Diagnostic Scanner
|
Supply Ability: |
|
Related proudcts |
tech2, gm tech2, |
Specifications |
Model Number:TECH2 |
Price Term: |
|
Port of loading: |
|
Minimum Order |
2 |
Unit Price: |
|
|
***ailed Product Attribute GM Tech 2 : Tech 2 scanner ***ailed Product Description
Gm Tech 2 Scanner Description:GM Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Gm Tech 2 Scanner Features: Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles. Support for on-board diagnostics on all GM systems 1992 thru current year. Removable hardware modules provide insurance against scan tool obsolescence. Large, easy-to-read backlit screen. RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. Ability to view the status of vehicle diagnostic tests as they run. Bi-directional
Gm Tech 2 Scanner Function: Vetronix Tech-2 Specifications
Microprocessor 32 bit, 16 MHz Memory 32 MB flash type II PCMCIA. Type III slot available for future expansion. Communications Integral RS232 communication port. Screen 3.8x2.8 backlit monochrome with full graphics capability: 320x240 pixels. Displays up to 9 vehicle parameters at once ( 5.2 Mb ) ( 6.8 Mb ) Tech-2 Flash Tester 32 MB PCMCIA Card with GM OE Applications CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb ) TIS2000 dongle to access SPS/Security features Data/Sensor/Trouble Code Manual DLC Cable, DLC Loopback Adapter 12V Cigarette Lighter Power Cable SAE 16/19 Adapter NAO 12/19 Adapter Battery Power Cable Storage Case An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash's diagnostic link cable and the OBD adapter. Once the module i |
Company: |
ALK Car Technology Co. , Ltd
|
Contact: |
Mr. Jamie Jiang |
Address: |
R805-807,Baishilong 2 Zone,Minzhi,Longhua,Baoan |
Postcode: |
518000 |
Tel: |
+86 0755 91098107 |
Fax: |
+86 0755 91098100 |
E-mail: |
|
|
|
|